Author: Marius Creutznacher
| Risk Category: High | Document ID: QSYS-October-19-9009 |
| Document Version: 1.0 | |
| Document Status: Final |
Description:
Q-SYS Peripherals (including Cores operating in Q-SYS Peripheral I/O mode and Q-SYS RoomSuite Peripherals) are vulnerable to an unauthenticated package install issue. This could allow an unauthenticated, remote attacker with the ability to reach the impacted device to install an arbitrary package onto an affected device. This can lead to Remote Code Execution, and potentially compromise the confidentiality, integrity or availability of the device.
Cores operating as Q-SYS Core Processors are not vulnerable to this advisory.
| CVE ID: | CVSS Vectors: | Score: |
| CVE still pending | CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:H/VA:L/SC:N/ SI:N/SA:N |
8.8 High |
Impacted Product Name:
Affected Product (Categories):
- Core Processors in Peripheral Mode I/O Mode
- NC Series
- NV Series
- QIO-VEN4
- TSC-Series (incl. PS-TSCG3)
- I/O-USB-Bridge
- CX-Q
- CXD-Q
- DPA-Q
- MPA-Q
- SPA-Q
- DCIO/-H
- QIO-ML24i
- QIO-24f
- QIO-L24o
Non-Affected Product (Categories):
- Core Processors
- RMP-100
- QIO-ML4i
- QIO-ML2x2
- QIO-L4O
- QIO-AES-8x8
- QIO-TEL2
- QIO-FLEX4A
- QIO-GP8x8
- QIO-S4
- QIO-IR1x4
- NM-T1
- NL-Series
Impacted Versions
Q-SYS Designer Version lower than 10.4
RoomSuite Modular System Firmware lower than 1.1.0
Impacts on Installed System
Potential full system compromise.
How to Diagnose Installed System
Use Q-SYS Peripheral Manager, Q-SYS Designer Configurator, or RoomSuite Manager to check current device firmware version. If the firmware is lower than 10.4 or respective RoomSuite Modular System Firmware lower than 1.1.0 , the system is vulnerable.
Mitigation
Update to Q-SYS Designer Version 10.4 or higher
Update to RoomSuite Modular System Firmware 1.1.0 or higher
Refer to the Q-SYS Secure Deployment Guide available at the following location for more information on securing a Q-SYS installation: Secure Deployment Guide
Updated Version
Q-SYS Designer 10.4
RoomSuite Modular System Firmware 1.1.0
Issue Fixed Date
29 September 2026
Attribution
The issues were identified by Andrew Furlani, a security researcher who focuses on AV systems and solutions.
Acuity knows of no exploitation of these vulnerabilities.
LEGAL DISCLAIMER:
THIS CONTENT IS PROVIDED ON AN "AS IS" BASIS FOR INFORMATIONAL PURPOSES ONLY AND IS PROVIDED WITHOUT ANY WARRANTY OF ANY KIND. THE CONTENT IS INTENDED FOR USERS OF ACUITY PRODUCTS WHO POSSESS THE PROFESSIONAL SKILLS AND JUDGMENT NECESSARY TO INTERPRET THE INFORMATION AND DETERMINE THE APPROPRIATE STEPS TO TAKE. USE OF THE INFORMATION IS AT THE USER'S OWN RISK. THE AUTHOR RESERVES THE RIGHT TO UPDATE OR DELETE THIS CONTENT AT ANY TIME.



